Fresh Water

Bucket

Solutions

Brush

Safety Glasses

Gloves

Wipes

Cleaning Kegs

STEP 1​

1. Fill Cleaning Keg with Cleaning Solution 

2. Place ID tag on Beer Keg 1 and Keg line 1

3. Un-tap coupler from Beer Keg 1

4. Connect coupler to Cleaning Keg 

5. Place ID tag on Beer Keg 2 and Keg line 2

6. Un-tap coupler from Beer Keg 2 

7. Connect Coupler to Cleaning Keg

​

​STEP 4

1. Disassemble and clean all and any ancillary equipment required

2. Reassemble all ancillary equpment and clean all areas used

STEP 2​

1. Place bucket under Beer Tap 1

2. Open Tap until cleaning solution flows 

3. Repeat for all Beer Lines

​STEP 5

1. Test a sample of beer from each line to ensure no contaminants or bad odours are present.

2.  Repeat Steps 1 through 4 if necessary.

3. Repeat for each draught line.

​STEP 3

1. Fill Cleaning Keg with Rinse Solution

2. Connect Keg 1 coupler to Cleaning Keg 

3. Open Tap 1 until cleaning solution flows

4. Run until no contaminants are visible 

5. Repeat for all Beer Lines 

6. ​Repeat Step 3 but with fresh cold water only

STEP 6

Enjoy